Xerox Security Bulletin XRX12-005 V1.1 (PDF 103.3K)

The Xerox devices ColorQube® 9201/9202/9203, ColorQube® 9301/9302/9303, WorkCentre® 232/238/245/255/265/275, WorkCentre® 5030/5050, WorkCentre® 5135/5150, WorkCentre® 5632/5638/5645/5655/5665/5675/5687, WorkCentre® 5735/5740/5745/5755/5765/5775/5790, WorkCentre® 6400, WorkCentre® 7525/7530/7535/7545/7556, WorkCentre® 7655/7665/7675, WorkCentre® 7755/7765/7775, WorkCentre® Bookmark 40/55, WorkCentre Pro® 232/238/245/255/265/275 were shipped with certain protocols enabled that, if properly exploited, could be used to gain
unauthorized access to the system. These particular protocols should not have been present in the production configuration and need to be removed from that configuration to minimize the possibility of unauthorized system access.

A software solution (patch P49) is provided for the products listed. This solution will remove from the production configuration the unwanted protocols in question so they can’t be exploited to gain unauthorized access to the system.

This solution is designed to be installed by the customer. The software solution is compressed into a 3 KB zip file and can be accessed via the link below or via the link following this bulletin announcement on the Xerox Security Site.

Software available through this link:


cert_P49v1_Patch2.zip